Loctite® Epoxy Five Minute Instant Mix 0.47 Oz

  • Sale
  • Regular price $4.60


Epoxy syringe is a must for bonding jagged and poor fitting surfaces. Two part adhesive includes an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond. Which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. 

KEY BENEFITS

  • Easy to use self-mixing dispenser and precision applicator
  • Waterproof, sand able and paintable
  • It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
  • Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
  • The static mix nozzle delivers a uniform mixture of resin and hardener every time.
  • It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
  • Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

----------------------------------------------------------------------------------------------------

Instructions
Surface Preparation. Protect work area. Surfaces should be clean, dry and tree of grease and oil. Roughen smooth surfaces for better adhesion. To Open and Dispense: 

  1. Hold syringe with nozzle end up and pull back slightly on plunger, allowing air bubbles to rise to top. 
  2. Snap cap off by pushing to the side. Do not twist.
  3. Attach nozzle over syringe opening, push past prongs, and turn 90 degrees to lock in place.
  4. Depress plunger to dispense epoxy directly onto one side of the surfaces to be bonded.
  5. Join surfaces within 4 minutes of adhesive application.
  6. Immediately remove excess glue with mineral spirits or rubbing alcohol (follow the solvent manufacturer's instructions). The bond sets in 5-7 min. and achieves usable strength in 20 min.
  7. Remove and discard nozzle and retract plunger slightly and wipe syringe tip.
  8. Remove cap from side holder and place on end of syringe.

5 Minute INSTANT MIX Epoxy5 Minute INSTANT MIX Epoxy5 Minute INSTANT MIX Epoxy